Cafelat Robot Barista Manual Espresso Maker

The Cafelat Robot Barista is a lever-style home espresso maker. By pushing down on levers, home brewers build up pressure inside the portafilter, dispersion screen, and basket. It uses few parts, no complicated electronics and only premium materials like stainless steel. All the parts for coffee are completely plastic free!

The water and coffee only contact stainless steel, a food grade silicone piston seal and a food grade silicone top pin of the filter screen. All components are tested for food safety. The main body is made from die-cast aluminium and powder coated but does not have any contact with the water or coffee.

What you need to make espresso

All you need is ground coffee, some hot water from a kettle and you are all set. The whole process is simple and takes just a few minutes – no need for any capsule machine and less plastic waste for the landfills.

Pressure gauge

The Robot Barista has a built in pressure gauge which will display the pressure from the basket during extraction. The pressure gauge displays the pressure that you exert with the arms. It does not create the pressure.

VIDEO: How to brew espresso with the Robot (No Tamping):

VIDEO: How Robot works inside the filter basket:

• Retro Green

Inside the box

• The main body of the Barista Robot with the arms and base assembled
• Full set of pressure gauge installed
• 1 portafilter and 1 portafilter spout
• 1 professional basket
• 1 tamper
• 1 stainless steel filter screen
• 1 bag of filter paper as a replacement of filter screen
• 1 silicone mat
• Piston blanking plug and Teflon washer